Beaver Tail Transporters

Beaver tail transporter trailers are manufactured in 3 weight ranges, 2 tonne, 2.6 tonne and 3.5 tonne gross and three lengths approx.. 14’, 16’ and 18’. All are supplied with 8’ long steel loading ramps and can be fitted with front drive-over ramps that slide out from under the body. The photos shown compare the rear ramp approach angles. The nearest is a hydraulic tilt trailer PT56 with standard slide-in ramps, the next uses low approach extension blocks, and the far trailer is a 355B with standard 8’ ramps.

Standard specification includes laser-cut and punched outer floor sections with load strapping points, full road lights, front jockey wheel, spare wheel and carrier, rear loading legs, and slide-in 8’ steel loading ramps. A hand winch is standard unless drive-over ramps are required, and a fold-over jockey wheel is also fitted.